CyberRevision
Continue revision → ← Subjects
Complete networking bank

All 5,000 questions.

Search the curriculum, filter by level, check your saved status, or open any question in revision mode.

0 answered overall

Showing 3,351–3,400 of 5,000 matching questions

50 per page
3351
Level 4 · Advanced Performance Unanswered

For a cloud migration threat model, why is understanding "jitter" technically important?

View answer choices
  1. Variation in packet delay or arrival time.
  2. The total capacity of a link.
  3. The number of lost routes.
  4. The size of an IPv6 address.
Practice →
3352
Level 4 · Advanced Performance Unanswered

For a cloud migration threat model, why is understanding "MTU" technically important?

View answer choices
  1. The minimum TCP port number.
  2. The age of a DNS record.
  3. The largest network-layer packet an interface can transmit without fragmentation.
  4. The maximum number of VLANs.
Practice →
3353
Level 4 · Advanced Performance Unanswered

For a cloud migration threat model, why is understanding "Path MTU Discovery" technically important?

View answer choices
  1. A process for finding the largest packet size that can traverse a path without fragmentation.
  2. A process for electing an STP root.
  3. A process for finding the nearest DNS server.
  4. A process for choosing the shortest OSPF route.
Practice →
3354
Level 4 · Advanced Transport Unanswered

For a cloud migration threat model, why is understanding "TCP three-way handshake" technically important?

View answer choices
  1. ACK, ARP, and DNS establish a VLAN.
  2. TLS records select an IP route.
  3. Three UDP broadcasts create reliability.
  4. SYN, SYN-ACK, and ACK establish initial TCP state and sequence numbers.
Practice →
3355
Level 4 · Advanced Transport Unanswered

For a cloud migration threat model, why is understanding "TCP sliding window" technically important?

View answer choices
  1. A flow-control mechanism allowing multiple bytes to be in flight before acknowledgment.
  2. A switch feature that blocks redundant links.
  3. A routing method that changes the next hop per byte.
  4. A DNS technique for rotating addresses.
Practice →
3356
Level 4 · Advanced Security Unanswered

For a cloud migration threat model, why is understanding "TLS certificate validation" technically important?

View answer choices
  1. The client accepts every self-signed certificate automatically.
  2. The router checks an OSPF metric.
  3. The client checks identity, trust chain, validity, and hostname before trusting a server.
  4. The switch validates only the source MAC.
Practice →
3357
Level 4 · Advanced Wireless Security Unanswered

For a cloud migration threat model, why is understanding "WPA3-SAE" technically important?

View answer choices
  1. A VLAN trunk negotiation mode.
  2. A routing protocol authentication type.
  3. A password-authenticated key exchange that resists offline dictionary attacks better than WPA2-PSK.
  4. An open wireless network with no authentication.
Practice →
3358
Level 4 · Advanced Wireless Unanswered

For a cloud migration threat model, why is understanding "wireless channel overlap" technically important?

View answer choices
  1. Channel selection affects only wired Ethernet.
  2. Every AP must use the same channel.
  3. Overlapping channels always double capacity.
  4. Nearby APs on overlapping channels can contend and interfere, reducing performance.
Practice →
3359
Level 4 · Advanced Wireless Unanswered

For a cloud migration threat model, why is understanding "controller-based WLAN" technically important?

View answer choices
  1. Centralized software manages access-point configuration, policy, and often traffic.
  2. A router uses BGP to assign SSIDs.
  3. Every AP must be configured with no shared control.
  4. A switch converts fiber to copper only.
Practice →
3360
Level 4 · Advanced Monitoring Unanswered

For a cloud migration threat model, why is understanding "NetFlow/IPFIX" technically important?

View answer choices
  1. Full packet payload capture for every frame by definition.
  2. A replacement for event logs.
  3. Flow telemetry summarizing conversations by fields such as endpoints, ports, bytes, and time.
  4. A protocol used to assign IP addresses.
Practice →
3361
Level 4 · Advanced Performance Unanswered

A security engineer documents "jitter" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The number of lost routes.
  2. The size of an IPv6 address.
  3. Variation in packet delay or arrival time.
  4. The total capacity of a link.
Practice →
3362
Level 4 · Advanced Performance Unanswered

A security engineer documents "MTU" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The maximum number of VLANs.
  2. The age of a DNS record.
  3. The minimum TCP port number.
  4. The largest network-layer packet an interface can transmit without fragmentation.
Practice →
3363
Level 4 · Advanced Performance Unanswered

A security engineer documents "Path MTU Discovery" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A process for finding the largest packet size that can traverse a path without fragmentation.
  2. A process for choosing the shortest OSPF route.
  3. A process for finding the nearest DNS server.
  4. A process for electing an STP root.
Practice →
3364
Level 4 · Advanced Transport Unanswered

A security engineer documents "TCP three-way handshake" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. TLS records select an IP route.
  2. SYN, SYN-ACK, and ACK establish initial TCP state and sequence numbers.
  3. ACK, ARP, and DNS establish a VLAN.
  4. Three UDP broadcasts create reliability.
Practice →
3365
Level 4 · Advanced Transport Unanswered

A security engineer documents "TCP sliding window" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A switch feature that blocks redundant links.
  2. A DNS technique for rotating addresses.
  3. A flow-control mechanism allowing multiple bytes to be in flight before acknowledgment.
  4. A routing method that changes the next hop per byte.
Practice →
3366
Level 4 · Advanced Security Unanswered

A security engineer documents "TLS certificate validation" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The switch validates only the source MAC.
  2. The router checks an OSPF metric.
  3. The client accepts every self-signed certificate automatically.
  4. The client checks identity, trust chain, validity, and hostname before trusting a server.
Practice →
3367
Level 4 · Advanced Wireless Security Unanswered

A security engineer documents "WPA3-SAE" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A password-authenticated key exchange that resists offline dictionary attacks better than WPA2-PSK.
  2. A VLAN trunk negotiation mode.
  3. An open wireless network with no authentication.
  4. A routing protocol authentication type.
Practice →
3368
Level 4 · Advanced Wireless Unanswered

A security engineer documents "wireless channel overlap" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. Every AP must use the same channel.
  2. Nearby APs on overlapping channels can contend and interfere, reducing performance.
  3. Overlapping channels always double capacity.
  4. Channel selection affects only wired Ethernet.
Practice →
3369
Level 4 · Advanced Wireless Unanswered

A security engineer documents "controller-based WLAN" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. Centralized software manages access-point configuration, policy, and often traffic.
  2. A switch converts fiber to copper only.
  3. A router uses BGP to assign SSIDs.
  4. Every AP must be configured with no shared control.
Practice →
3370
Level 4 · Advanced Monitoring Unanswered

A security engineer documents "NetFlow/IPFIX" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A protocol used to assign IP addresses.
  2. Full packet payload capture for every frame by definition.
  3. Flow telemetry summarizing conversations by fields such as endpoints, ports, bytes, and time.
  4. A replacement for event logs.
Practice →
3371
Level 4 · Advanced Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "jitter". What is the accurate meaning?

View answer choices
  1. The total capacity of a link.
  2. The size of an IPv6 address.
  3. The number of lost routes.
  4. Variation in packet delay or arrival time.
Practice →
3372
Level 4 · Advanced Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "MTU". What is the accurate meaning?

View answer choices
  1. The maximum number of VLANs.
  2. The age of a DNS record.
  3. The largest network-layer packet an interface can transmit without fragmentation.
  4. The minimum TCP port number.
Practice →
3373
Level 4 · Advanced Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "Path MTU Discovery". What is the accurate meaning?

View answer choices
  1. A process for electing an STP root.
  2. A process for finding the largest packet size that can traverse a path without fragmentation.
  3. A process for choosing the shortest OSPF route.
  4. A process for finding the nearest DNS server.
Practice →
3374
Level 4 · Advanced Transport Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "TCP three-way handshake". What is the accurate meaning?

View answer choices
  1. SYN, SYN-ACK, and ACK establish initial TCP state and sequence numbers.
  2. ACK, ARP, and DNS establish a VLAN.
  3. Three UDP broadcasts create reliability.
  4. TLS records select an IP route.
Practice →
3375
Level 4 · Advanced Transport Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "TCP sliding window". What is the accurate meaning?

View answer choices
  1. A switch feature that blocks redundant links.
  2. A DNS technique for rotating addresses.
  3. A routing method that changes the next hop per byte.
  4. A flow-control mechanism allowing multiple bytes to be in flight before acknowledgment.
Practice →
3376
Level 4 · Advanced Security Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "TLS certificate validation". What is the accurate meaning?

View answer choices
  1. The client checks identity, trust chain, validity, and hostname before trusting a server.
  2. The switch validates only the source MAC.
  3. The router checks an OSPF metric.
  4. The client accepts every self-signed certificate automatically.
Practice →
3377
Level 4 · Advanced Wireless Security Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "WPA3-SAE". What is the accurate meaning?

View answer choices
  1. A routing protocol authentication type.
  2. A password-authenticated key exchange that resists offline dictionary attacks better than WPA2-PSK.
  3. An open wireless network with no authentication.
  4. A VLAN trunk negotiation mode.
Practice →
3378
Level 4 · Advanced Wireless Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "wireless channel overlap". What is the accurate meaning?

View answer choices
  1. Channel selection affects only wired Ethernet.
  2. Overlapping channels always double capacity.
  3. Nearby APs on overlapping channels can contend and interfere, reducing performance.
  4. Every AP must use the same channel.
Practice →
3379
Level 4 · Advanced Wireless Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "controller-based WLAN". What is the accurate meaning?

View answer choices
  1. A router uses BGP to assign SSIDs.
  2. A switch converts fiber to copper only.
  3. Every AP must be configured with no shared control.
  4. Centralized software manages access-point configuration, policy, and often traffic.
Practice →
3380
Level 4 · Advanced Monitoring Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "NetFlow/IPFIX". What is the accurate meaning?

View answer choices
  1. Flow telemetry summarizing conversations by fields such as endpoints, ports, bytes, and time.
  2. A replacement for event logs.
  3. A protocol used to assign IP addresses.
  4. Full packet payload capture for every frame by definition.
Practice →
3381
Level 4 · Advanced Performance Unanswered

An analyst validating a government zero-trust rollout sees "jitter". Which technical explanation should be used?

View answer choices
  1. The total capacity of a link.
  2. The size of an IPv6 address.
  3. Variation in packet delay or arrival time.
  4. The number of lost routes.
Practice →
3382
Level 4 · Advanced Performance Unanswered

An analyst validating a government zero-trust rollout sees "MTU". Which technical explanation should be used?

View answer choices
  1. The largest network-layer packet an interface can transmit without fragmentation.
  2. The minimum TCP port number.
  3. The maximum number of VLANs.
  4. The age of a DNS record.
Practice →
3383
Level 4 · Advanced Performance Unanswered

An analyst validating a government zero-trust rollout sees "Path MTU Discovery". Which technical explanation should be used?

View answer choices
  1. A process for choosing the shortest OSPF route.
  2. A process for electing an STP root.
  3. A process for finding the nearest DNS server.
  4. A process for finding the largest packet size that can traverse a path without fragmentation.
Practice →
3384
Level 4 · Advanced Transport Unanswered

An analyst validating a government zero-trust rollout sees "TCP three-way handshake". Which technical explanation should be used?

View answer choices
  1. Three UDP broadcasts create reliability.
  2. TLS records select an IP route.
  3. SYN, SYN-ACK, and ACK establish initial TCP state and sequence numbers.
  4. ACK, ARP, and DNS establish a VLAN.
Practice →
3385
Level 4 · Advanced Transport Unanswered

An analyst validating a government zero-trust rollout sees "TCP sliding window". Which technical explanation should be used?

View answer choices
  1. A routing method that changes the next hop per byte.
  2. A DNS technique for rotating addresses.
  3. A flow-control mechanism allowing multiple bytes to be in flight before acknowledgment.
  4. A switch feature that blocks redundant links.
Practice →
3386
Level 4 · Advanced Security Unanswered

An analyst validating a government zero-trust rollout sees "TLS certificate validation". Which technical explanation should be used?

View answer choices
  1. The client checks identity, trust chain, validity, and hostname before trusting a server.
  2. The client accepts every self-signed certificate automatically.
  3. The switch validates only the source MAC.
  4. The router checks an OSPF metric.
Practice →
3387
Level 4 · Advanced Wireless Security Unanswered

An analyst validating a government zero-trust rollout sees "WPA3-SAE". Which technical explanation should be used?

View answer choices
  1. A VLAN trunk negotiation mode.
  2. A routing protocol authentication type.
  3. An open wireless network with no authentication.
  4. A password-authenticated key exchange that resists offline dictionary attacks better than WPA2-PSK.
Practice →
3388
Level 4 · Advanced Wireless Unanswered

An analyst validating a government zero-trust rollout sees "wireless channel overlap". Which technical explanation should be used?

View answer choices
  1. Nearby APs on overlapping channels can contend and interfere, reducing performance.
  2. Every AP must use the same channel.
  3. Channel selection affects only wired Ethernet.
  4. Overlapping channels always double capacity.
Practice →
3389
Level 4 · Advanced Wireless Unanswered

An analyst validating a government zero-trust rollout sees "controller-based WLAN". Which technical explanation should be used?

View answer choices
  1. Every AP must be configured with no shared control.
  2. Centralized software manages access-point configuration, policy, and often traffic.
  3. A switch converts fiber to copper only.
  4. A router uses BGP to assign SSIDs.
Practice →
3390
Level 4 · Advanced Monitoring Unanswered

An analyst validating a government zero-trust rollout sees "NetFlow/IPFIX". Which technical explanation should be used?

View answer choices
  1. Full packet payload capture for every frame by definition.
  2. A replacement for event logs.
  3. A protocol used to assign IP addresses.
  4. Flow telemetry summarizing conversations by fields such as endpoints, ports, bytes, and time.
Practice →
3391
Level 4 · Advanced Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "jitter" is correct?

View answer choices
  1. Variation in packet delay or arrival time.
  2. The total capacity of a link.
  3. The number of lost routes.
  4. The size of an IPv6 address.
Practice →
3392
Level 4 · Advanced Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "MTU" is correct?

View answer choices
  1. The minimum TCP port number.
  2. The age of a DNS record.
  3. The largest network-layer packet an interface can transmit without fragmentation.
  4. The maximum number of VLANs.
Practice →
3393
Level 4 · Advanced Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "Path MTU Discovery" is correct?

View answer choices
  1. A process for finding the largest packet size that can traverse a path without fragmentation.
  2. A process for electing an STP root.
  3. A process for finding the nearest DNS server.
  4. A process for choosing the shortest OSPF route.
Practice →
3394
Level 4 · Advanced Transport Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "TCP three-way handshake" is correct?

View answer choices
  1. ACK, ARP, and DNS establish a VLAN.
  2. TLS records select an IP route.
  3. Three UDP broadcasts create reliability.
  4. SYN, SYN-ACK, and ACK establish initial TCP state and sequence numbers.
Practice →
3395
Level 4 · Advanced Transport Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "TCP sliding window" is correct?

View answer choices
  1. A flow-control mechanism allowing multiple bytes to be in flight before acknowledgment.
  2. A switch feature that blocks redundant links.
  3. A routing method that changes the next hop per byte.
  4. A DNS technique for rotating addresses.
Practice →
3396
Level 4 · Advanced Security Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "TLS certificate validation" is correct?

View answer choices
  1. The client accepts every self-signed certificate automatically.
  2. The client checks identity, trust chain, validity, and hostname before trusting a server.
  3. The router checks an OSPF metric.
  4. The switch validates only the source MAC.
Practice →
3397
Level 4 · Advanced Wireless Security Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "WPA3-SAE" is correct?

View answer choices
  1. A password-authenticated key exchange that resists offline dictionary attacks better than WPA2-PSK.
  2. A routing protocol authentication type.
  3. A VLAN trunk negotiation mode.
  4. An open wireless network with no authentication.
Practice →
3398
Level 4 · Advanced Wireless Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "wireless channel overlap" is correct?

View answer choices
  1. Channel selection affects only wired Ethernet.
  2. Every AP must use the same channel.
  3. Overlapping channels always double capacity.
  4. Nearby APs on overlapping channels can contend and interfere, reducing performance.
Practice →
3399
Level 4 · Advanced Wireless Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "controller-based WLAN" is correct?

View answer choices
  1. Centralized software manages access-point configuration, policy, and often traffic.
  2. Every AP must be configured with no shared control.
  3. A router uses BGP to assign SSIDs.
  4. A switch converts fiber to copper only.
Practice →
3400
Level 4 · Advanced Monitoring Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "NetFlow/IPFIX" is correct?

View answer choices
  1. Full packet payload capture for every frame by definition.
  2. Flow telemetry summarizing conversations by fields such as endpoints, ports, bytes, and time.
  3. A replacement for event logs.
  4. A protocol used to assign IP addresses.
Practice →